So here we have the block nice and cleaned out. Bored 30 over because two cylinders had some bad marks on it
and here is the other side
Here are the new pistons and rods
So now that i have all this cleaned up and new stuff i started to put it all together
so the crank was polished and checked no major damage done to it and all together and all clearance checked i was happy :D
the heads are stock and i had the intake cleaned and painted new cam bearings and the stock cam met the specs so i was able to put it all together
New pushrods and all the goodies
and here it is all together
now not pictured is my fully built T56 from Six Speed Inc. It was built with CF syncs gears to match my 4.10 rear end gears bronze pads, and all the great stuff in it!
